Expanding Fence Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple, easy to print and assemble fidget.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
This fidget can be printed at any size and with tight or loose rivets. Loose rivets will make it spinnier while tight rivets will allow it to hold its position.
I've provided a 3mf file containing plates for 2-, 3-, and 5-section fidgets, but you can make fidgets of any length by following these formulas for sizing:
- Sticks: 2 * sections
- Rivets: 3 * sections - 2
For example, a 5-section fidget would need:
- (2 * 5 =) 10 Sticks
- (3 * 5 - 2 =) 13 Rivets
A 5-section fidget takes about 20g of filament.
I've also provided a 3mf file containing a shorter 2-section loose fidget which is great for spinning.
STL, SCAD, and 3mf files provided. No supports necessary for printing.
Assembly Instructions
Lay out half of the sticks side by side on top of the female rivet pieces. Leave the top of one side stick and the bottom of the other side stick open.
Lay the remaining sticks across the original sticks, angling them in the opposite direction.
Push the male rivet pieces into the female rivet pieces to complete assembly.
All models uploaded to Printables are uploaded with a free Personal Use License. Commercial Use Licenses are available to Supporters/Distributors on Patreon.