JBL Charge 3 Battery Cover Replacement (Reinforced)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fix for broken battery cover.
- Ocena
- 2 / 5
- Polubienia
- 7
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 571
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If your JBL Charge 3 speaker has a swollen or damaged battery, chances are the original battery cover has cracked or broken. This is a common problem because the OEM cover is thin and not designed to handle swelling over time.
This 3D printable replacement battery cover is designed to fix that issue:
🛠 Direct replacement for the stock JBL Charge 3 battery cover
💪 Reinforced design for more strength and durability compared to the original part
🔩 Easy to install – uses the same screws and mounting points as the OEM cover
🧹 Keeps the battery compartment protected from dust and debris
Printing recommendations
Material: PETG or ABS (recommended for heat resistance and toughness)
Orientation: Flat on the print bed
Notes ⚠
If your battery is swollen, replace it as soon as possible. This part is meant as a repair and upgrade, not a substitute for a failing Li-ion battery.
Works only with the JBL Charge 3 (not compatible with Charge 2, Charge 4, or other models).