1 / 2
Smokpub Cocktail Smoker Travel Case — zdjęcie 1
1 / 2

Smokpub Cocktail Smoker Travel Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protect the smoker and tins from travel damage or accidental activation in a more convenient way than the original box.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
66
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Smokpub comes in a very protective box, but it doesn't travel well and takes up a lot of space. This model is a case for the main Smokpub smoker and the tin boxes of wood. 

The tolerances are tight, so I recommend printing just the bottom of the Smokpub case and check the fit. If its good, print the top. If not, scale up the model 0.5% and try again. The wood tin case shouldn't need any test fitting.

The 3MF files use a layer height modifier to set 0.25mm layers for the main section and 0.2mm for the threaded section. This keeps the threads smooth but the rest of the body printed a bit more quickly. There is also a recess for seams in the case so the part orientation and seam position setting are also purposeful.

These were designed for PLA (so things like ABS or other “high” shrinkage filaments will require compensation). 

Make sure to wait for the smoker to cool down before storing! Cheers.