Shimano Bleed Boss Cap for BR-9270 and BR-8170
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement cap for the bleed boss on hydraulic disc brake calipers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
The stock bleed boss cap fits pretty loose, so it's easy to lose. The cap design just friction-fits onto the barb, but it's a loose fit. Print a new one to keep dirt and grime out of the port.
This part fits Shimano Dura-Ace BR-R9270, Shimano Ultegra BR-R8170, and Shimano 105 BR-R7170. It may also fit other Shimano bleed ports that look like this.
(Make sure you thoroughly clean out the bleed port and let it dry before you put the cap on, if the cap has been missing for a while. Otherwise, you may put dirt into the system the next time you do a bleed service!)
Print using TPU, 100% infill (if you are using a fine nozzle). Higher resolution is better, given the wall thickness, but feel free to experiment and let us know what you find! I printed using 0.2mm layer resolution.
