1 / 2
Spacer to fit 18500 in 18650 battery holder — zdjęcie 1
1 / 2

Spacer to fit 18500 in 18650 battery holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to fit a protected 18500 battery in an unprotected 18650 battery holder, for the WHY2025 badge.

Ocena
5 / 5
Polubienia
6
Pobrania
22
Wydruki
1
Wyświetlenia
481
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The WHY2025 badge had holders for unprotected 18650 cells. I'd rather have protected cells in mine, so I made this adapter to make a protected 18500 battery fit in the holder.

Use at your own risk.

Each adapter requires either a flat-ended M6 x 10mm grub screw, or a cut-down piece of M6 threaded rod.

I have attached a mitre box for cutting M6 threaded rod.

You may also be interested in my WHY2025 Badge Case.

Tagi