Broadhead Box with improved lid anti jam design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Same as the Improved Broadhead box design, with some minor changes to help push or pull the lid and base apart if jammed
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added the ability to grab the broadhead base by the bottom by using thumb and index finger, or by using pliers or other tools. You can also push the base down through two holes in the lid.
The original creator mentioned a possible issue with the lid and the base getting stuck together, so I designed a way to separate them easier.
Print suggestions: Add Cylinder Modifier blocks under each broadhead with 100% infill. 4 Perimeter walls, 5 Bottom layers, 4 top layers. 15% Grid infill.
I attached the Fusion 360 .f3d file if anyone wants to make further modifications.