Gel Blaster Surge Hopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom gel blaster Surge hopper designed to fit the vibe of the blaster, but also to increase the performance.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 289
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom gel blaster surge hopper designed to not only fit the vibe of the blaster, but to also increase its performance. Have you ever had a hopper jam up because the gellets weren't feeding correctly into the gun? While this hopper does not completely get rid of this problem it does alleviate most of the issue by using the same principle as the proto primo paintball hopper. This allows the hopper to feed faster and the user to do little to no shaking of the hopper to get it to feed. The hopper does require two m3x30 screws and two m3 nuts to secure the hopper halves. This design has been thoroughly tested in battle and it has been very reliable and durable. Sorry about there not being any source files for this model, I designed it using Tinkercad before I got Fusion360.
If you would like to support my work
buymeacoffee.com/SightsandBricks
"If you want to find the secrets of the universe, think in terms of energy, frequency, and vibration"- Nikola Tesla