1 / 6
Porous silica gel container with screw on lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
200ml container for storing silica gel to keep your filament dry and the silica gel dust inside.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 729
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
Modeled in Fusion 360 and then made permeable to air by modifying the models with cylinder volumes that delete the perimeter/bottom/top layers for the parts that should be porous.
The 60% gyroid infill gives a very small pore size that keeps the dust back.

I've attached the almost completely parameterized Fusion 360 file so you can change the dimensions. (You might have to manually fiddle with the ridges group)