TPU Rear Light Seatstay Spacer/Mount (optimized for Surly CrossCheck)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU Spacer/Mount for a bicycle rear light to go on a seat stay instead of the seat post.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I try to mount my bicycle rear lights as high up as possible. All of my battery powered bicycle rear lights are optimized to be mounted right below the saddle on the seat post - the ideal position. Unfortunately in my case this space is occupied by my saddle bag. So I tend to mount these lights on one of the seat stays which has to issues: First the diameter of the seat stay is very slim and second (and more problematic) the rear light is facing upward direction. To address these to issues by increasing the diameter and at the same time adjusting the angle of the rear light I created this spacer.
The spacer is optimized for the seat stay diameter and angle of my Surly CrossCheck.
To be printed in TPU!