Tic Tac Toe Toilet Paper Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mounted toilet paper holder that mimics a tic tac toe game board.
- Ocena
- 4,5 / 5
- Polubienia
- 740
- Pobrania
- 976
- Wydruki
- 4
- Wyświetlenia
- 9653
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
Introduction
This wall-mounted toilet paper holder is designed to resemble a tic-tac-toe board. It features a central piece with embedded slots for securing it to the wall using up to 4x6mm screws. There are three assembly options available, and depending on your choice, you'll need to print a specific set of parts.
Printing
| Open Top/Closed Bottom | All Open | All Closed |
|---|---|---|
|
|
|
 |  |  |
If you want you could also print the X's to be able to set-up the piece as the game where the rolls are the O's. In this case I recommend printing 4x the X piece.
I printed the set using ABS on my Voron 2.4 using the following settings:
- 3 Wall Loops
- 4 Top Layers
- 3 Bottom Layers
- 7% Cross-Hatch Infill
The print orientation should be evident.
When printing in ABS, adding mouse-ear brims to the side parts can be helpful. The brim won't interfere with the assembly because the models have a small chamfer at the base.
Assembling
Place the center piece with the wall-facing side on a flat surface. Arrange the side pieces around the center piece. If you selected the closed sides, assemble the R and L sides first before attaching them to the center piece. Depending on your printer's tolerances, you may need to apply a bit of super-glue to secure the side pieces to the center piece.
Fixing it to the Wall
After assembly, check the center piece—there are four holes designed for 6 mm (1/4 in) screws. Choose screws that are appropriate for your wall type and secure the piece in place.
