1 / 2
Aruco markers 1-10 Print-in-Place — zdjęcie 1
1 / 2

Aruco markers 1-10 Print-in-Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Print in Place 4x4 Aruco Makers from https://chev.me/arucogen Design by Keenan Granland Made for Monash ECE4078

Ocena
0 / 5
Polubienia
2
Pobrania
26
Wydruki
0
Wyświetlenia
246
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Standard Digital File License

I'll add to this later msg me if you have questions. 

I did these on a 2 head Prusa with PETG. Can be done with PLA better results with PETG.

STL is the model

3mfs have all svgs and number correctly placed. 

Make sure your bottom layer patter is at a 45 degree angle to the square cube as to not tare along the folds. 

Tagi