120 Film Scanning Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
120 Film Scanning Tool
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 576
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
To scan your 120 negatives.
Use your DSLR camera.
PRINTING
I printed this model with black PLA, layer height 0.16 mm, 3 perimeters.
The Scanning Tool and the Sledge need support.
ASSEMBLY
Assemble the upper and lower part of the Film Stroke Holder. Use glue.
Slide the Film Stroke Holder into the Scanning Tool.
Screw the two bolts in the Sledge (Short or Long) and slide the Sledge into to Scanning Tool. Tighten the Bolts.
Mount your camera to the Sledge using the Camera Bolt (6 mm imbus).
Most cameras have a tripod mount in the center of the camera. If not you can use one of the other slots of the Sledge.
A tripod is advised and can be screwed to the underside of the Sledge.
OPERATION
Slide the film stroke into the Film Stroke Holder until you see the wanted picture in the frame opening.
Aim the Scanning Tool at a bright light source. I use my laptop screen with the white picture.
Press the release button of your camera.