1 / 2
PebbleBee Clip Rugged Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rugged case for PebbleBee, with two latch rings.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple and solid casing for PebbleBee clip.
Useful when you want to latch your GPS tracker in a solid way and with redundant connections.
Print Settings
Material:
- PETG recommended
- PLA less sturdy
Infill: 30%
Supports: on build plate only (for screw holes)
Material Needed
- 2x M3x8 screws, cylindrical head, hex key
- 2x M3 nuts, 2.2mm thickness
- Prusa Pliers
How to insert nuts:
- Nuts must be inserted with image orientation in slots.
- Push nuts into slots with fingers, and then use Prusa Pliers to insert the first 1.2mm, leverging the M3 thread hole.
- Push furthermore nuts into the slots (always look for correct orientation) by leveraging the external hole
- Use pliers in horizontal to slide the nut into the socket.
- To remove the nut, simply use some sturdy nails/needles.
Once the nuts are positioned, put the PebbleBee tracker inside and fasten the screws.
