1 / 2
Parachutes de France analog altimeter replacement shell — zdjęcie 1
1 / 2

Parachutes de France analog altimeter replacement shell

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I lost the rubber frame for this analog Parachutes de France altimeter, so I made a new 3D-printed frame. This frame…

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I lost the rubber frame for this analog Parachutes de France altimeter, so I made a new 3D-printed frame. This frame looks nothing like the original. It's a very snug fit. It has a cutout for the adjustment screw, and for the split ring that holds the glass in place. This frame will hold the glass in place if that has come loose.

For a looser fit, increase inner diameter by 0.5mm by resizing the whole thing. If it's a looser fit, it will rely on the space between the glass and altimeter body to stay in place. I have not tested if the six nubs on the inside are a good size for this.

One remix idea would be to place LEDs around the edge of the glass, in order to illuminate the dial for nighttime jumps. Please post this if you make it.

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 Plus

Rafts:

Doesn't Matter

Supports:

Yes

Infill:

100%

Category: Sport & Outdoors

Tagi