Flexing 18650 battery bracket with integrated spring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cut-off and slightly modified version of the original design by enif on Thingiverse.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a cut-off and slightly modified version of the original design by enif on Thingiverse. I designed this for building battery packs out of 18650 cells, where the cells are most efficiently stacked in a staggered pattern. I have not actually built a pack out of these yet, since I've just made my first functioning prints. I'm printing in PETG, but ABS should also work. PLA may be too stiff. Use 100% infill. Batteries should be inserted near the spring where the thing is most flexible, and then pushed towards the flat side. Unfortunately I don't know enough about OpenSCAD to make this parametric like the original.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 Plus
Rafts:
No
Supports:
No
Infill:
100%
Notes:
Printed using PETG. ABS should work too. PLA is probably too stiff. Use 100% infill in order to make a strong part that supports tension well.
Category: Electronics