1 / 3
Meshtastic 10in rack panel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10-inch rack mount plate designed specifically for the Heltec V3 ESP32 Meshtastic LoRa device.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 157
- Wydruki
- 1
- Wyświetlenia
- 1217
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (3)Kolekcje (68)Powiązane
This is a 10-inch rack mount plate designed specifically for the Heltec V3 ESP32 Meshtastic LoRa device. It allows you to securely mount your Meshtastic radio in a standard 10-inch rack enclosure for a clean, organized setup.
Printed on an Elegoo Centauri Carbon
Model size: 254mm x 44.5mm
Print with at least 3 perimeters/walls for rigidity
No supports required. Print it flat.
The mount provides:
- Custom fit cutout for the Heltec V3 ESP32 board
- Secure mounting points to hold the device in place
- 10-inch rack compatibility for network, radio, and portable rack systems
- A neat and professional look for home labs, ham radio shacks, or field deployments
- Perfect for Meshtastic users who want their gear neatly mounted instead of loose on the desk.
Printing Notes:
- Recommended material: PETG or ABS for strength and durability, but PLA works fine if your rack doesn't get hot
- Print with at least 3 perimeters/walls for rigidity
- No supports required (depending on printer settings)
- Uses (2) M2.5x8 mm screws to attach backing plate. Could be hot glued if you cant find screws.