Double Door Bar – +20 mm (with STEP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the Double Door Bar, +20 mm longer for wider knob spacing and includes the STEP file for easy modification.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 55
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of sincsum’s Double Door Bar.
My door knobs are spaced wider than the original model, so I increased the bar length by 20 mm. I also cleaned up some of the geometry slightly and included the STEP file so you can easily adjust the length or tweak other dimensions to fit your setup.
Print Recommendations
Material: PETG (originally tested), but PLA+ or ASA should also work
Walls / Perimeters: 3
Infill: 15%+ works fine
Layer Height: 0.2 mm
Supports: None required
Tip for Modifying
Measure the center-to-center distance between your knobs before printing.
If your spacing is different, open the included STEP file and update the bar length in your CAD tool of choice.