LoRa Pipe Antenna Mount (100mm Pipe, 28.5mm Antenna)

Overview:
This is a specialized antenna mount designed for securely fixing a 28.5mm diameter fiberglass LoRa antenna to a 100mm round drainpipe. The mount is ideal for outdoor installations, gateway setups, or any scenario where you need to position your antenna on a standard pipe.

Features:

• Secure Fit: Uses an M6 screw and nut to clamp tightly around the drainpipe, offering a stable base.
• Antenna Clamp: The antenna holder uses an M3 screw and nut for easy tightening and secure positioning.
• Sturdy Print: The model was designed to be printed in PETG for strength and UV resistance, with 4 perimeters for enhanced durability.
• Optimized for FDM Printing: Print with organic supports and a 30-degree overhang threshold for best results (recommended but not mandatory).
• Easy Assembly: Minimal hardware required for fast installation and removal.

Suggestions:

• This mount is ideal for LoRa or similar antennas but could be repurposed for WiFi or other radio projects.
• PETG is recommended for outdoor use due to its weather and UV resistance, but ABS or ASA may work as well.

Material & Hardware List

3D Printing:

• Material: PETG filament (recommended)
• Print settings:
  • 4 perimeters
  • Organic supports
  • Overhang threshold: 30°

Hardware (per mount):

• 1x M6 screw (approx. 35-50mm length, depending on your preference)
• 1x M6 nut
• 1x M3 screw (approx. 16-20mm)
• 1x M3 nut

Feel free to adjust any parameters based on your specific test results or preferences! Let me know if you need other diameters for your antenna or pipe.

Looking forward to see some “makes”!