Quarter Inch Plywood Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip that can be slipped onto the edges of two quarter inch plywood pieces to align them.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a clip that can be used to align two pieces of quarter inch (¼", .25in) plywood.
I've placed this model into the Halloween category because that's what I designed this model for - our Halloween decorations. We have some Halloween displays that are made up of several pieces of painted quarter inch plywood. We needed something to hold and align the pieces together on the edges where they weren't attached to a base.
Quarter inch plywood is approximately 6.35mm thick. This clip tapers from 6.5mm to 6.0mm for a snug and secure fit. I printed mine using the Generic PLA and .20mm SPEED profiles with 4 perimeters in IIIDMax PLA+ Navy Blue.