Cybertruck With Spinning Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A relatively simple Cybertruck design with spinning wheels.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Public Domain
A relatively simple Cybertruck design with spinning wheels. All parts are already oriented in the best position to print. Note that the wheels_grouped file contains all four wheels already positioned and ready to print, while the wheels_single file contains a single wheel. The same is true for the cybertruck_grouped file and the cybertruck_front / cybertruck_rear files.
Print the axles at 0.2 mm layer height and enable outer brim of at least 10 mm to ensure good bed adhesion.
If you have any feedback, positive or negative, let me know in the comments. I’d love to hear what you think!
Print Settings:
- Layer Height: 0.2 mm
- Infill: 10%
- Supports: Yes (only on the cybertruck_rear, cybertruck_front, and cybertruck_grouped files)
- Brim: No (except on the cybertruck_axles file, where you should enable at least a 10 mm outer brim)
Assembly
Glue front and back pieces together.
Insert axle into first pair of wheels as shown.
Slide axles through the wheel mount pieces.
Glue wheel mounts onto the body. TIP: While the wheel mount pieces are drying, set the Cybertruck on its wheels to ensure they are all even.
Finished! Enjoy your brand new Tesla Cybertruck!