Tomtom bandit windfilter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a lens bumper with room for a peace of foam to dampen the wind that blows into the microphone
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This filter helps immensely with keeping wind away from your bandit's mic, works surprisingly well.
I've tested it on my motorcylce and i get clear motorcycle noise easily up to 100 km/h, recordings are better that what i can hear while filming it.
I printed it out of TPE but any TPU will do as well, i used dual stage air filter foam with a coarse and a fine layer…. Specific this one: https://www.scooterdiscounter.nl/luchtfilter-malossi-double-red-sponge-universeel-schuim-297x210mm.html?utm_source=googleshopping&utm_medium=cpc&utm_campaign=googleshopping&gad_source=1&gad_campaignid=9465223368&gbraid=0AAAAADf26pd3gVcqwMehTb31MIgzy3klR&gclid=CjwKCAjwk7DFBhBAEiwAeYbJsal9RRpjHuCcQUknVfDULtkvdL7isVWOZYJDrQQ3kqoVW08sFrg2vBoCIHsQAvD_BwE
You'll need a square bit of foam 30x12mm and at least 16mm thick.