Longtos - The Ontos Long Dart Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed center section parts for the Ontos Nerf blaster for long darts. Note: this remix is for the legacy Ontos only!
- Ocena
- 4,833 / 5
- Polubienia
- 53
- Pobrania
- 142
- Wydruki
- 9
- Wyświetlenia
- 1460
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
These mod parts will let you fire long darts on an Ontos. Why? My kid has a ton of long darts and it's a pain to separate them all. Plus, I just wanted to see if I could do it.
Tested with Nerf and Worker long dart magazines. I even put a Worker Talon mag adapter in it to get real weird. Still works and will fire both sizes of darts.
This replaces seven Ontos parts:
- Center Left
- Center Right
- Mag Release
- Breech
- Priming Bar
- Ram
- Optic Rail
All other parts are standard Ontos build parts and uses the standard hardware.
The mag release is thinner to allow for room if you want to use a Worker Talon mag adapter. I have no idea why anyone would want to do this, but it works. Otherwise, the parts are lengthened as needed for the long dart mags. A clearance notch is also needed on the underside of the priming bar for the long dart mags because of a molded feature on the nerf mag feed lips. This may weaken the priming bar slightly and I did not test it with any spring in excess of 1.4mm diameter. So, I wouldn't recommend using anything over the 1.4mm diameter spring at this time. Happy to update this later if anyone wants to test a bigger spring.
All standard Ontos print settings and assembly instructions still apply. I added the new step files if you want to mod something.
Wear safety goggles while using and don't shoot your eye out.