1 / 1
Dust bowl for drilling 90mm downlight holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill attachment for drilling downlight holes without making a mess.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I saw these dust bowls in hardware stores and thought I would try to make one using TPU. It worked brilliantly.
My first try was a bit too high to work very well so I reduced the height a bit, but included both versions. This would depend on the height of the hole saw - ideally needs to be lower than the pilot drill bit and just slightly higher than the edge of the hole saw.
