1 / 1
6 Ton Daytona (Harbor Freight) Jack Stand Pinch Weld Pad — zdjęcie 1

6 Ton Daytona (Harbor Freight) Jack Stand Pinch Weld Pad

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Jack stand pad for Daytona 6 Ton jack stands

Ocena
0 / 5
Polubienia
11
Pobrania
58
Wydruki
0
Wyświetlenia
494
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As of writing this, there are two slightly different versions of Daytona 6 ton jack stands sold by Harbor Freight. One has a center column width of about 28mm and the other about 32mm. This is for the 32mm version. You might be able to adjust the model parameters to fit the 28mm version but I'm not sure if the contour shape of the saddle is the same.

You can adjust the model parameters in the fusion file. The width that fits over the saddle can be changed, the pinch weld slot width, angle of the opening, and height measured from the bottom of the slot.

Printed in TPU nearly solid with 5 walls and 80% infill. Better to be safe than sorry. About 100 grams of filament each. Print upside down, no support is necessary.

Tagi