1 / 1
Uno-Vac Thermos #4 stopper w/TPU Gasket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stopper designed to fit an Uno-Vac thermos. Original was stamped with #4 which I assume to be the size.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 839
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the first item I have ever modeled in Fusion 360. Dad's old Uno-Vac thermos had mold damage on the original stopper. Spent a few hours modeling a new one for basic use.
I'd advise PETG for the heat resistance and of course, always take precautions with using 3D printed parts near food or drink.