Meeting Room Status Slider (Multi-Color / No MMU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple, two-piece sliding sign to show meeting room availability. Prints in 4 colors on any standard FDM printer—no MM
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 439
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Tired of people walking in on important meetings? This is a simple, two-part sliding sign that clearly indicates whether a room is available or in use. Just slide the cover to reveal "YES" (in green) or "NO" (in red).
The best part? This model is designed to be printed in multiple colors on a standard, single-extruder FDM printer without any special hardware like an MMU or AMS. It uses the "Pause at Height" or "Filament Change" feature in your slicer to achieve the multi-color effect.
Features:
- Simple two-piece assembly.
- Clear and easy-to-read text.
- Prints completely flat on the build plate.
- Designed for easy manual filament changes at specific layers.
Printing Instructions
This model is designed to be printed with a 0.2mm layer height. To get the multi-color effect, you will need to add "Pause" or "Filament Change" commands in your slicer at the specific layer heights listed below.
- Printer: Any standard FDM Printer
- Layer Height: 0.2mm
- Infill: 15-20% is sufficient
- Material: PLA works great
Color Change Sequence (at 0.2mm layer height):
- Layers 1-7 (0.0mm - 1.4mm): Start with Black filament.
- Layers 8-12 (1.6mm - 2.4mm): Change to Green filament.
- Layers 13-16 (2.6mm - 3.2mm): Change to Red filament.
- Layers 17-21 (3.4mm - 4.2mm): Change to White filament.
- Layer 22 to Finish (4.4mm+): Change back to Black filament.
Assembly
Assembly is simple! Just slide the inner piece into the outer frame. The fit should be snug enough to hold its position but loose enough to slide easily. If it's too tight, a little light sanding on the edges of the inner piece will help.
I've included the STL files for you to slice yourself, as well as my pre-sliced G-code file for reference.
I hope you find this useful for your office or workspace. Please post a make if you print it—I'd love to see your color combinations!