angle grinder disc storage (up to 125mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an easy storage for angle grinder discs, with a threaded part in order to keep them together
- Ocena
- 4 / 5
- Polubienia
- 33
- Pobrania
- 219
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
16th SEMPTEMBER 2025 - NEW MODEL AVAILABLE
uploaded a new model with outside walls to protect discs from side impacts.
printed in Amazon Basic PETG, 0.4 nozzle, 5 side walls to give some strenght and 1mm top/bottom surface. the result is pretty strong for a normal use, but if you throw it at full strenght across the room it may break!
--------------------------------------------------------------------------------------------------------------------------------
a simple stack to keep your discs together. still making improvements to the model (available and downloadable for everyone).
right now i'm sketching a version with an outer wall, always needing a nut and not a complete cap.
THREADS PROBABLY WILL NEED A QUICK PASS WITH SAND GRIT
(depends on your printer settings).
if your printer has a tolerance lower than 0.20, everything is ok.
the one in the picture has a different pattern, but the one included in the file should be faster and less consuming.
feel free to make your own and post pics!
ask for any custom part, i'll do my best to make it for you (always remember that i'm a self made designer, so keep your desires low please)