1 / 4
Diesel Heater Tent Vent - Tube (turned 90°) — zdjęcie 1
1 / 4

Diesel Heater Tent Vent - Tube (turned 90°)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original tube of the diesel heater does not fit well when the base plate can only be mounted vertically.

Ocena
0 / 5
Polubienia
12
Pobrania
109
Wydruki
1
Wyświetlenia
955
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Diesel Heater Air Intake Redirect – 90° Adapter for Vertical Mounting

When mounted vertically, the original inlet nozzle of the diesel heater obstructs proper installation or alignment (see attached image). This 3D-printable adapter solves the issue by rotating the air intake 90°, allowing for a clean and space-efficient installation. It’s ideal for tight setups or custom configurations where vertical mounting is required.

 

Features:

  • Designed for vertical heater installations
  • Redirects air intake securely and efficiently
  • Space-saving solution for compact environments
  • Compatible with standard diesel heaters

I redesigned and printed these connectors for a friend who needed a vertical mounting solution for his car tent setup. To make it work, I also modified the air duct and the controller mount accordingly (see: Diesel Heater Tent Vent – Controller Mount (turned 90°)).

Tagi