Single-Hand Tightening Mod for Stitching Pony
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the tightening screw of the remixed model so that it can be tightened with one hand
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 196
- Wydruki
- 2
- Wyświetlenia
- 902
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replaces the tightening screw of https://www.printables.com/model/1224263-stitching-pony-for-leather so that it can be tightened with one hand, leaving the other one free to hold the work piece in place.
Furthermore, the screw design is replaced with one that can be printed in one piece, with maximum 45 degrees overhang. Also, the screw head is flat, so that it is easier to tighten it.
The screw here has the exact same dimensions as the original's screws and nuts, so you can also just print one of two parts of this mod.
See https://cad.onshape.com/documents/f450414c8cb3a80430e9bca2/w/711ae3969c7a127a99d7e45f/e/199dfd3e05bedd26a84d2df5?renderMode=0&uiState=68adbb34363a0720b34a2c68 for model files.
Printing
Tested with “pristine white” Prusament PETG.
Support is only needed for the screw head and is easy to remove with a knife due to its flat shape, see attached 3mf.
From https://www.printables.com/model/1224263-stitching-pony-for-leather , you thus only need to combined_clamp.stl and the bracket parts, if you cannot use an off-the-shelf clamp to attach the pony to your table.
