DF54 Grinder Funnel/Bellow Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the DF54 Grinder, to more securely attach the rubber funnel to the grinder.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This adapter makes the rubber funnel fit more snuggly to the DF54mm Grinder. The adapter has a friction fit to the metal opening and a small lip to grip the rubber funnel. It adds about 10mm of height, increasing the total capacity slightly.
I printed it with both .8 and .12mm layer heights on a Bambu P1S, using support for only the inner overhang, not the upper outer lip. .2mm would probably work too.
There are two version: one that needs to be printed with supports but fits the metal funnel without a step (as in the pictures) and one that does not need supports, printing more cleanly but will have a step between the inner wall of the adapter and the upper ledge of the metal funnel.
You can use the Autodesk Fusion file to edit the model should you find issues with fit or gaps on your printer/settings.