EU Pegborad Allen key holder / Werkzeugwand Inbushalter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ein Halter für Inbusschlüssel der Größen 1,5 - 14 mm für eine Standardwerkzeugwand. Hex key holder for EU Pegboard
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Der Halter funktioniert für alle möglichen “China-Werkzeugwände” mit einem Abstand von 45 mm zwischen den Langlöchern. Er nimmt die Größen 1,5 - 14 mm auf. Siehe Fotos. Ich habe die Freecad-Datei hinzugefügt, sodass ihr leicht selbst Änderungen machen könnt. In der .3mf Datei sind die Zahlen in den Druck mit eingeprägt, die step datei ist ohne die beschriftung.
The holder works for most “china peg boards” with a distance of 45 mm between the long holes. The holder hosts your Allen keys from 1,5 - 14 mm. See photos for further info. I included the Freecad file for easy adaptation if needed. You'll find the .3mf file including the numbers at the front, whereas the step file is clean.