Moka Pot Basket Holder (2 cup & easily scalable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Moka coffee basket for filling and tamping coffee, designed for 2-cup Bialetti Moka, can be easily scaled up.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TESTED FOR BIALETTI BRIKKA 2, BIALETTI EXPRESS 2, and one unbranded 2 CUP MOKA.
A holder for a moka 2‑cup basket. It is designed in a way that makes it easily scalable to any aluminum basket size, just by measuring your basket diameter and scaling it accordingly in the slicer (the stainless steel holders sometimes have different holder angles).
No supports are needed; print it upside down to avoid printing the 90° overhang. I used a 0.4 mm nozzle, a 0.2 mm profile, and 15% 3D honeycomb infill for stiffness in all axes to ensure longevity. All common materials can be used—I tried PETG and PLA, and both work just fine.
On my profile, you can find the rest of the moka pot accessories shown in the pictures (tamper and funnel), which are compatible with this holder.
If you want some modifications or new Moka pot gadgets, let me know. Unfortunately, I only have 2‑cup moka pots, so I cannot measure and make different cup sizes. If somebody is willing to give me the measurements, I can scale the model.