Moka Pot Tamper (2 cup & easily scalable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tamper for Moka pot, designed for 2-cup Bialetti, can be easily scaled up.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TESTED FOR BIALETTI BRIKKA 2, BIALETTI EXPRESS 2, and one unbranded 2 CUP MOKA.
A tamper (smooth and with rings) for a moka 2‑cup basket. It is designed in a way that makes it easily scalable to any aluminum basket size, just by measuring your basket diameter and scaling it accordingly in the slicer.
No supports are needed; print it upside down to avoid printing the 90° overhang. I used a 0.4 mm nozzle, a 0.2 mm profile, and 15% 3D honeycomb infill for stiffness in all axes to ensure longevity. All common materials can be used—I recommend the PETG, PCTG for the “food safety - for dry powders" reasons. I recommend the smooth one, because the coffee sometimes gets stuck between the rings - I made some model adjustments to prevent this, but the top of the print needs to be very smooth in order to avoid coffee sticking.
On my profile, you can find the rest of the moka pot accessories shown in the pictures (funnel and holder), which are compatible with this tamper.
If you want some modifications or new Moka pot gadgets, let me know. Unfortunately, I only have 2‑cup moka pots, so I cannot measure and make different cup sizes. If somebody is willing to give me the measurements, I can scale the model.