SuperGarbage SGI parody badge/keytag (now v2)

First of all, the design was not made by me, it was made by Compgeke. He gave me permission to make this into something 3D printable and distribute it. 

This is a keytag (or case badge, if you print the ones without the hole) with a parody of SiliconGraphics' logo. You might have seen these before if you've been to VCF West (2025 and 2026) or VCF SoCal (2026).

If you wanted to make your own/can't pick one up at a VCF event, here's your opportunity to print your own! At the current scale, a 0.2mm nozzle is required, as the fine details simply won't work on a 0.4mm nozzle.

There are two sets. The ones marked "v2" are the 2026 redesign I've handed out at VCF this year, with less-rounded corners and a smaller overall size. I also got a hold of the original font files (thanks to Compgeke, again) and thickened up the text to make it more legible (as the yields were...kinda not good because the "Computer S**t" part sometimes didn't print right due to how thin the typeface was).

Though, just in case the old versions are preferred, they've been left here for your perusal.

Print Settings: 0.2mm nozzle required, 15% infill is fine, printing face down is recommended to allow the texture to apply to the text side. You may want to turn on ironing to make the reverse side look good.

Enjoy your SuperGarbage!