[Now with Handle!] OnBox // Parametric Box in Onshape // V1.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
https://cad.onshape.com/documents/d8e59fd26c8f20bd6613be02/w/b96cb695bd654f0bc3794355/e/61c20b9f8ed3bdf2d238030d
- Ocena
- 5 / 5
- Polubienia
- 182
- Pobrania
- 439
- Wydruki
- 1
- Wyświetlenia
- 2530
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
It turns out not everyone has Autodesk to customize Whity's version, so I made one in Onshape clean-room style just by looking at the printed box. Hence the Public Domain license – do whatever you want with it, but don't complain if it scares your cat and it runs away.
Few improvements:
Sections
Single latch version
More clicky and durable latches
Minor design improvements for aesthetics and convenience
Attaching STLs just for a 100x150x50 version without separators to encourage use of OnShape CAD model instead.
CHANGELOG
V1.1
Fixed distance calculation between vertical side ribs for narrow boxes.
V1.2
Included height in pre-configured sizes
Split configs for X and Y sections to allow only one direction
Support for custom bolt sizes
V1.3
Added single latch version
V1.4
Made hinge and latch ribs thickness depend on bolt length, so they are generally thicker for increased strength.
V1.5
Added handle