Circle Cutter for Paper and Flash Gels, non-puncturing (60 to 71 mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Circle Cutter for Paper & Gel Sheets A custom circle cutter designed to create round sheets without leaving a hole.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 698
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Circle Cutter for paper or gel sheets
Overview:
This circle cutter was created to cut perfectly round gels for use on round head flashes like Godox AD100, AD200 and V1. Unlike standard circle cutters, this design leaves no hole in the center, making it suitable for gel sheets where an intact circle is required.
Adjustable 60 to 71 mm diameter.
Key Features:
Blade System: Uses segments of box cutter blades (18 × 8.47 mm or 18 × 9 mm).
Fasteners: Requires M4 screws — three short ones for securing the blades, plus one 30 mm long M4 screw with a cylindrical head (Ø 7 mm × 4 mm tall) that acts as the central axis.
Base: The suction cup component should be printed in soft TPU for best results. Alternatively, a thin rubber pad can be glued to the bottom. This prevents slipping, which is essential for cutting accurate circles.
Usage:
Cut a paper disc first and see if it fits in whatever holder you're using
Some flat rigid plastic or cardboard on top of a rubber mat makes cutting a lot easier