Multiple Carburetor Sync Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PET cap with a Boss and 3 Holes to make a simple but very accurate Carburetor Sync Tool.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A PET Cap with a Boss and 3 Holes to make a simple but very accurate Carburetor Sync Tool, you only need 6mm (or ¼") clear Hoses and a PET Bottle for each Carburetor(throat).
Insert 1 Hose in a Cap Hole from the Top until its flush or sticks out a few mm from the Boss inside the Bottle . The other side of the Hose goes to one of the Carburetor (throats).
Do this for every Carburetor (throat).
Next connect the Bottles together with a Hose but this time the Hose needs to go the Bottom of the Bottles.
You need a Hose from the Bottom of Bottle Nr 1 though one Hole in Cap 1 to one Hole in Cap 2 to the Bottom of the Bottle Nr 2 and another Hose from Bottom of Bottle 2 trough a Hole in Cap 2 to Cap 3 to the Bottom of the Bottle 3 and so on.
In the “outer” 2 Sync Caps you need to plug one of the Holes.
Now you can fill each Bottle with the same amount to about ⅓ to ½ with some colored Liquid and start syncing your Carbs.