Neopixel ring AMD stock cooler upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Neopixel ring mount for the AMD Wraith Stealth cooler.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Having completed my new PC build I had little to no spare change for any flashy RGB CPU coolers. I figured that my 5600 will function with the stock cooler just fine, but I also wanted to make it look better. That's when I found these Neopixel rings, this one with 32 LEDs in particular. It's diameter is almost that of the fans (only a small over hang) and doesn't seem to alter its performance or make it produce turbulent noise.
I originally wanted to make the model as a single piece, but because the ring is slightly larger than the fans rim there's a small overhang that would produce alot of wasted support material. So I've split it and glued the two parts.
The AMD logo on the cooler gets covered by the mount. It's also the spot where you can feed the wires to the ring through.
I recommend you to print the bottom part (where the ring is mounted) on a glossy surface, that adds some nice reflection to it.
———————————————[ Support my work! ]———————————————
I started 3D modeling a while back and I’m still learning a lot. I’m currently a student with the ambition of becoming an engineer. I want my models to be available for anyone to build, so I’m not selling them. If you like what you see, or if you have tips to share, feel free to leave a comment.
—————————————————————————————————————————————————————————