Qui-Gon Jinn's Lightsaber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modeled in Blender and edited for printing. Pretty simple to construct: Print a Top, Mid, Bot, Shroud, and Knobs (2)…
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 1480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
Modeled in Blender and edited for printing.
Pretty simple to construct:
Print a Top, Mid, Bot, Shroud, and Knobs (2)
Glue together
I've included the larger parts broken up to print on smaller printers as well as larger parts.
I can print one of these in less than two hours by spreading across 5 Dremel 3D40's - that's the one in the cover image. Can also be painted and weathered.
It really wasn't an attempt to go 100% movie accurate and shouldn't be used as such. I didn't do the design in proper CAD so some of the faces are wonky from the subtraction I used to make the parts printable. Everything should be manifold and I have no issues running it through Simplify3D
Print Settings
Printer:
Dremel 3D40
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
200um/300um
Infill:
20%ish - Doesn't matter
Notes:
Support on the bottom section needs to be carefully removed using tweezers. There's room to get the supports out.
Print everything vertically.Category: Props