Bourbon Tasting Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bourbon tasting board was designed to look like a stave from a whiskey barrel.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bourbon tasting board was designed to look like a stave from a whiskey barrel.
Print as shown in the yellow preview image for the cleanest layer appearance and fit for your print bed. I used wood PLA, so this created a better wood-grain pattern.
No supports are needed as the stemware base holes are tapered. The board was designed to fit snifter tasting glasses that varied slightly in diameter with an average of 58mm. Scale the hole bases to the size of your glassware.
Recommended tasting glasses:
https://www.amazon.com/gp/product/B09X177T5K/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Edit 3/29/24: Added an STL without indents for glasses.