Hyundai N logo keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keychain if you love the Hyundai N and don't have a MMU in place. Otherwise go for the other version
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 227
- Wydruki
- 4
- Wyświetlenia
- 924
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
This print is designed to work without a MMU. You need silver, red and black filament.
black: 0-2,2
red: 2,2 - 2,8
silver: 2,8 - 3
0.2mm layer height
Printed it in PLA and this version survived for 3,5 years with heavy usage. Then I replaced it with the MMU version https://www.prusaprinters.org/prints/139675-hyundai-n-logo-keychain-with-mmu2s
Best if you print directly more than once at the same time.
Please share some nice pictures of your prints, cause I only have old ones where the silver layer had some issues (was Filament related, not file related).
If you have a MMU I would recommend to print this version https://www.prusaprinters.org/prints/139675-hyundai-n-logo-keychain-with-mmu2s