Qidi X Smart 3 Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Qidi X Smart 3 feet to help with vibrations and to help with air flow to the control board
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these feet to lift the printer to increase air flow to the control board. The feet raise the printer about 18 mm. These feet also help reduce vibrations. There are two different feet available. One requires removing the old feet and reusing the fastener/washer, and the other is a compression fit that needs to be pushed onto the existing feet. I made the compression version because the fasteners on my X Smart 3 were seized in the heat-set inserts. The compression version will need to be trimmed to fit on the right front corner.