Norton Commando Engine Valve Lift Gauge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tools to measure valve lift on a Norton Commando 750/850.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to measure the valve lift on my Norton Commando to convince myself that I'd got all four pushrods seated correctly when I reinstalled the head. These jigs are made for use with this gauge sold on Amazon:
https://www.amazon.com/dp/B01JYCVHLK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
I printed them in PETG plastic and found them stiff enough to get measurements repeatable to 0.008" of lift or so while the engine was still in the bike and I was pressing with my hand on the kickstart lever to roll the crank/cam over. I suspect if I'd done this with the engine on the workbench and a degree wheel attached, it would have been even more accurate.