CZ P10 F Magwell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CZ P10 F Magwell that's compatible with the Taylor Freelance Brass backstrap and HBI +2 Baseplates
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 250
- Wydruki
- 0
- Wyświetlenia
- 1298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- GNU General Public License v3.0
I have customized my P10F to be a bit more of a comp gun, and I wanted a magwell - however, with the Taylor Freelance Brass backstraps (https://taylorfreelancestore.com/cz-p10-f-backstrap-alum-black/) it was harder to find a milled magwell, so I decided to make one and print it.
I currently run HBI +2 baseplates, which are a bit larger and therefore require some specific clearances. If you use slimmer baseplates, you'll most likely have no issues to begin with.
Printed in PET-CF at 100% infill, might want to use some light supports for the rear mag ramp to make it smooth.
V2.0 - removed the flare as I got requests for a version without it.