1 / 1
Metric 40mm PT printed parts for Silly's Cynthia — zdjęcie 1

Metric 40mm PT printed parts for Silly's Cynthia

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parts needed to use 40 mm OD metric plunger tubes on Silly's Cynthia blaster

Ocena
0 / 5
Polubienia
8
Pobrania
16
Wydruki
0
Wyświetlenia
244
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

In case you cant find the original imperial plunger tube (PT) and 38 mm OD PTs aren't available here are the parts needed to convert to 40 mm OD PT on Cynthia.

Generally only PT cover 40 is critical and the “block” parts can be taken from the original Silly's set, but for some clear PETg filaments, a little extra space is needed to accommodate the PT. If printing in clear PETg it's advisable to use altered midblock and PT cover and preferably back block to make sure PT fits and slides freely. An easy check is to look whether your ram is perfectly centered in the dart guide, if not, use looser part variants. Misalignment and too much tightness is not critical but will reduce your performance from 250 to 200 fps on a K26.

Tagi