Garden hose quick connector to pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to connect a pump with 28mm connector to a garden hose with quick connector.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I have a project where I connect a solar driven pump. This pump has a 28mm outlet that I need to connect to a hose.
Print standing with snug tower supports. It is made so there is no need for support on the inside. Only on the tip profile.
I used PETG with 0.2mm layers, 4 walls, concentric solid infill and cubic sparse infill at 15%. Turned out great and is already pumping water into my rig.
For sealing, you can use o-ring as there is space for it but I only used rubber paint on the tip and electric tape between the adapter and the pump.