1 / 2
Hood Bumper Holder for Peugeot 308 — zdjęcie 1
1 / 2

Hood Bumper Holder for Peugeot 308

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This 3D model is a replacement part for the fragile hood bumper mounting bushing that commonly breaks on Peugeot cars

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
323
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Standard Digital File License

So, on some modern Peugeot cars—like my 2020 Peugeot 308—the adjustable rubber bumpers under the hood sit in some pretty flimsy holes. It's super easy to snap them off if you just let the hood fall closed instead of guiding it down by hand. Guess what? That's what happened to me.


This 3D model is the solution. For the best results, I'd suggest printing it with PETG and an infill of around 100%. I printed mine at 75%, and it's been plenty strong.
Fair warning: the fit is really tight. You'll need to use some serious force to get the part into the hole. But don't be afraid of breaking anything on the car—the car's plastic is much tougher than the 3D-printed part. Once you get it in there, you can just pop the original rubber bumper right back into your new, sturdy mounting point.

Tagi