Thrustmaster Sim Racing Magnetic Shifter Mod Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small magnet holder that uses magnets to convert any old TM sim racing wheel's paddle shifters to a whole new level.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this for my Thrustmaster TX Leather Edition Wheel. Should work on other TM wheels though.
Printing:
Print at 0.15 or 0.20 resolution.
Either PLA or PETG will work.
Organic supports can be used if needed.
After printing:
Place 1, 2, or 3 small neodymium magnets into holes (depending on how much resistance you would like). You might have to push it flush using a table or something flat.
Glue a small piece of poster paper or something else on top of the magnet side to act as a cushion for the paddle shifter to hit.
Use a small piece of double sided tape to attach to the back of the wheel.
Enjoy!