Rediced – D20 Mold for 3D Printing Waste
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recycle 3D printing scraps into unique D20 dice! Turn your "print-poop" into a fully functional D20.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 698
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Rediced – From “Print-Poop” to D20
3D printing is fun, but it can create a lot of waste. With this method, you can recycle leftover filament from supports, color changes, or calibration and turn it into a D20 dice.
Warning: High temperatures and fumes may occur. Work in a well-ventilated area and wear heat-resistant gloves. No liability for injuries or damages.
What you need
- D20 press mold
- Filament scraps (~6.3 g)
- Heat gun or oven
- Silicone mold
- Heat-resistant gloves
Important: Print the mold in PETG if you’re using PLA scraps or vice versa.
Recommended Print Settings
- Layer height: 0.2
- Wall Loops: 6
- Infill: 25%
Instructions
- Prepare the mold: Assemble the mold, so that the opening is facing upwards. Optionally, grease the mold for easier release.
- Soften the material: Heat the sorted scraps in a silicone mold until soft, not fully liquid.
- Shape & press: Form the softened material to fit into the mold opening, then press it using the lid. Hold for a few seconds and let cool for 1–2 minutes.
- Remove the dice: Take it out while still lukewarm, trim excess, and paint the numbers if desired.
Voilà – your own “Rediced” D20, made from recycled 3D printing leftovers!
You can find a more detailed description here.
This Print is also on MakerWorld available.
Enjoy your new die and have fun making many more, happy printing!