Food Dish for REPTIZOO Large Reptile Ledge Feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reptile food/water dish for REPTIZOO brand large size ledge feeder. Sturdy, reusable and fit ledge feeder perfectly!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
Sturdy, reusable food/water dish for REPTIZOO brand gecko feeding ledges (this model was specifically designed to fit the REPTIZOO large, faux-rock, 2 dish, magnetic ledge, though I believe it will fit other ledges by the same brand).
I suggest printing in PETG or TPU, but PLA will work as well. Given these dishes will be holding food, water and getting dirty over time, I recommend prioritizing structure over speed to minimize seams/imperfections that could become filled with dirt and grossness over time. I've had the best results printing these in PETG with 20% infill and .15mm layer height, but feel free to tinker with these setting as you please!
The rim at the top will likely require supports. I've had decent success with Prusa Slicer organic supports sparsely spaced and set to build on bed plate only. Additionally, this person's support settings (I've used their .15mm preset, will link below) are incredible. The supports are easy to remove and don't muck up the surface between model and support. Link to their support settings if you'd like to give them a try:
https://www.printables.com/model/272542-best-prusa-mk3ss-support-settings-for-prusaslicer
Enjoy!